Rep 8.1.3.3 Duplex Rear Cover - Xerox DocuPrint N24 Service Manual

REP 8.1.3.3 Duplex Rear Cover

Parts List on PL 8.1.2.1
Removal
1 Switch off the printer power and disconnect the AC Power Cord.
2 Remove the Duplex Cover (REP 8.1.3.2).
3 Position the Duplex Assembly so the Inner Chute faces up.
4 Remove the two screws securing the Rear Cover to the Duplex Assembly, and remove the Cover
(Figure 8.1.3.3a).
Replacement
1 Position the Rear Cover over the Duplex Assembly.
2 Route the Support Cable through the small, rectangular opening in the Rear Cover.
3 Seat the Cover on the Duplex Assembly, and use two screws to secure the Cover.
4 Reinstall the Duplex Cover.
DocuPrint N24, N32 and N40 Service Manual
Figure 8.1.3.3a. Duplex Rear Cover
3/99
8-29 Options