Rap 8.4.7.2 Error Code "Paper Jam Clear Area B - Xerox DocuPrint N24 Service Manual

RAP 8.4.7.2 Error Code "Paper Jam Clear Area B"

1 Inspect the paper that is loaded in the paper cassette. The paper loaded in the cassette is
smooth (not wrinkled) and not damaged.
Y N
|
Replace the paper with new paper.
2 Inspect the paper path for paper scraps or foreign objects that could cause a paper jam. The
paper path is clear.
Y N
|
Clear the paper path.
3 Enter Diagnostic Mode - Input H/L, REGI Sensor Detect. Insert a sheet of paper into the
Registration Sensor and press [4], then remove the sheet of paper and press [4]. The Control
Panel LCD displays "IS WITH PAPER" when paper in inserted into the Registration Sensor and
"IS WITHOUT PAPER" when the paper is removed.
Y N
|
Check the wiring between P/J 100 and P/J 459 (6.3.14). If OK, replace the Registration
Sensor (4.42).
4 Enter Diagnostic Mode - Output Test, main Motor On/Off to start the Main Motor. Open the Tray 2
Transport Cover. The Take Away rolls rotate when Main Motor runs.
Y N
|
Problem with the Tray 2 Feeder Drives. Replace the Feed Drive repair kit. (PL 3.7).
5 Enter Diagnostic Mode - Input H/L, T/A Roll Sensor Detect (Select Tray 2). Insert a sheet of
paper into the Tray 2 Take Away Sensor and press [4], then remove the sheet of paper and press
[4]. The Control Panel LCD displays "IS WITH PAPER" when paper is inserted into the Tray 2
Take Away Sensor "IS WITHOUT PAPER" when the paper is removed.
Y N
|
Check the wiring between P/J 143 AND P/J 408 (6.3.12). If OK, replace the Tray 2 Take
Away Sensor (PL 5.2).
6 Replace the HCF PWB (REP 8.4.3.5). The error message reappears.
Y N
|
Problem solved.
7 Replace the Printer Engine Controller PWB (REP 4.10.6).
Options
3/99
8-250 DocuPrint N24, N32 and N40 Service Manual