Xerox DocuPrint N24 Service Manual page 841

Network laser printer

Hide thumbs Also See for DocuPrint N24:

Table of Contents

1 Position the Eject Clamp Sensor into cutout in the Eject Clamp Sensor Bracket.

2 Reconnect P841 to the Sensor.

3 Reinstall the Eject Clamp Sensor Bracket onto the Eject Bracket. Use one screw to secure the

Sensor Bracket.

4 Reinstall the wire harnesses to the wire clamps that are attached to the Eject Bracket.

5 Reinstall the Upper Rear Cover.

DocuPrint N24, N32 and N40 Service Manual

Chapters

Table of Contents