Replacement
1 Reinstall the Vertical Sensor to the Lower Chute, and use screw to secure it to the Chute.
2 Reinstall the Lower Chute, and use two screws to secure it to the frame.
3 Reroute the wire harness up the front of the Mailbox frame.
4 Reinstall the LED Cover and LED to the Bin 1 Assembly, and use screw to secure it to the
Assembly.
5 Reconnect P/J 823 located near the LED.
6 Reinstall the ACT Cover Assembly.
7 Verify proper operation.
3/99
Options
8-102
DocuPrint N24, N32 and N40 Service Manual