Xerox DocuPrint N24 Service Manual page 833

Network laser printer

Hide thumbs Also See for DocuPrint N24:

Table of Contents

1 Reconnect P840 to the Sensor

2 Position the End Wall Open Sensor into the Sensor cutout in the Sensor Bracket.

3 Reinstall the Tie Plate and use the four screws to secure it to the frame.

4 Reinstall the Upper Left Cover.

5 Reinstall the Transport Assembly.

6 Reinstall the Upper Rear Cover.

7 Reinstall the Stapler Door Inner Cover Assembly.

8 Reconnect the Finisher to the printer.

DocuPrint N24, N32 and N40 Service Manual

Figure 8.5.3.52b. End Wall Open Sensor.

Chapters

Table of Contents