Rep 4.2 Paper Feed; Rep 4.2.1 Pick-Up Roll Assembly - Xerox DocuPrint P1202 Service Manual

REP 4.2 Paper Feed

REP 4.2.1 Pick-Up Roll Assembly

Removal
1 Switch the printer power off and disconnect the AC power cord.
2 Remove the Paper Tray.
3 Remove the Printer Cartridge (REP 4.5.1).
4 Remove the System Controller PWB (REP 4.6.2).
5 Remove the Control Panel Harness Cover (REP 4.1.2).
6 Disconnect the Control Panel Harness from J1 on the Control Panel.
7 Remove the Main Cover (REP 4.1.3).
8 Turn the Printer over so the buttom is facing upward.
9 Remove the three scews from the left base bracket (Figure 4.2.1a).
Xerox DocuPrint P1202 Service Manual
Figure 4.2.1a. Left Base Bracket Removal.
3/99
www.printcopy.info
4-11
egl_318a
Repair Procedures