Xerox DocuPrint N24 Service Manual page 491

Step 3
The Drum and BTR place an image onto the second side of the sheet of paper. The Drum/BTR drive the
paper into the Heat and Pressure Rolls. The Heat and Pressure Rolls drive the sheet into the Exit Unit.
Depending on the output location the user selected, the Exit Gate Solenoid toggles the Exit Gate so the
paper path runs to either the Face Down Output Bin or back through the Duplex Module and into the
Face Up Output Bin. If the user selected the Face Down Output Bin the Exit Gate Solenoid toggles the
Exit Gate so the paper path runs to the Offset Roll, which drives the sheet into the Face Down Output
Bin. If the user selected the Face Up Output Bin, the Exit Gate Solenoid toggles the Exit Gate so the
paper path runs to the Exit Rolls, which drive the sheet into the Duplex Module. Inside the Duplex
Module the Duplex Exit Gate Solenoid toggles the Duplex Exit Gate so the paper path runs to the Duplex
Exit Rolls, which drive the paper into the Face Up Output Bin.
1 Heat Roll
2 Pressure Roll
3 Two sided sheet fed to the Face Up Bin
4 Exit Roll
5 Duplex Exit Gate (down)
6 Exit Roll
7 Exit Gate (up for Output Bin) (down for Face Up Bin)
8 Offset Roll (forward)
9 Two sided sheet fed to the Face Down Output Bin
DocuPrint N24, N32 and N40 Service Manual
The Duplex Module Paper Path: Two sided sheet feed
3/99
8-53 Options