Rep 4.1.7 Control Panel - Xerox DocuPrint N24 Service Manual

REP 4.1.7 Control Panel

Parts List on PL 1.1
Removal
1 Switch off the printer power and disconnect the AC Power Cord.
2 Remove the Fuser Full Cover (REP 4.1.1)
3 Remove the Top Cover (REP 4.1.2)
4 Turn the Top Cover up side down to access the Control Panel (Figure 4.1.7a).
5 Carefully push in on the four tabs securing the Control Panel to the Top Cover, while you press
the Control Panel out of the Cover (Figure 4.1.7a).
Replacement
1 Position the Control Panel over the opening in the Top Cover Assembly, and press the Panel into
the opening until it snaps into place.
2 Reinstall the Top Cover.
3 Verify proper operation.
Repair Procedures
Figure 4.1.7a. Control Panel Removal.
3/99
4-14 DocuPrint N24, N32 and N40 Service Manual