Xerox DocuPrint N24 Service Manual page 940

1- Docking Cover
The Docking Cover sits on top of the printer Fuser Exit area. The Docking Cover contains the IN Gate.
The IN Gate diverts the paper path from the Face Up Bin to the Finisher. When the Finisher is the desig-
nated output of a print run, the Finisher PWB actuates the IN Gate Solenoid, which is located in the
Transport section of the Finisher. The IN Gate Solenoid lowers the IN Gate which diverts the paper path
into the Finisher Transport Assembly.
Docking Cover Paper Path Components
1 IN Gate
Normally up. The IN Gate Solenoid lowers the IN Gate to divert paper into the Finisher Transport.
2 Upper Chute
Helps direct the paper into the Transport Rolls.
3 IN Gate Solenoid
Controlled by the Finisher PWB, the IN Gate Solenoid raises and lowers the IN Gate. The IN
Gate Solenoid is located in the Transport, and is attached to the IN Gate through the IN Gate
Link.
Options
3/99
8-502 DocuPrint N24, N32 and N40 Service Manual