Rep 8.5.3.86 In Gate Actuator - Xerox DocuPrint N24 Service Manual

Network laser printer

Hide thumbs Also See for DocuPrint N24:

Table of Contents

REP 8.5.3.86 In Gate Actuator

Parts List on PL 8.5.2.22

1 Switch off the printer power and disconnect the AC Power Cord.

2 Roll the Finisher away from the printer until it stops.

3 Lift the Docking Cover Assembly off of the Fuser.

4 Remove the IN Gate Support Assembly (REP 8.5.3.85).

5 Spread the latch arms of the Actuator and slide it off of the shaft (Figure 8.5.3.86a).

1 Position the IN Gate Actuator and press the IN Gate Actuator onto the shaft.

2 Reinstall the IN Gate Support Assembly.

3 Reinstall the Docking Cover Assembly onto the Fuser.

4 Reconnect the Finisher to the printer.

DocuPrint N24, N32 and N40 Service Manual

Figure 8.5.3.86a. In Gate Actuator.

Table of Contents