Rep 8.3.3.5 Envelope Feeder Center Bracket Assembly - Xerox DocuPrint N24 Service Manual

REP 8.3.3.5 Envelope Feeder Center Bracket Assembly

Parts List on PL 8.3.2.1
Removal
1 Switch off the printer power and disconnect the AC Power Cord.
2 Remove the Envelope Feeder from the base engine.
3 Remove the Bottom Cover (REP 8.3.3.1).
4 Remove the Top Cover (REP 8.3.3.2).
5 Remove the three screws securing the Center Bracket Assembly to the frame, and remove the
Center Bracket (Figure 8.2.3.5a).
6 Remove the two screws securing the I/F Harness to the Center Bracket, and remove the I/F
Harness (Figure 8.2.3.5a).
Replacement
1 Reinstall the I/F Harness to the Center Bracket, and use the screws to secure the Harness to the
Bracket.
2 Reinstall the Center Bracket to the Feeder frame, and use the screws to secure the Bracket to
the frame.
3 Reinstall the Top Cover.
4 Reinstall the Bottom Cover.
DocuPrint N24, N32 and N40 Service Manual
Figure 8.3.3.5a. Center Bracket Assembly.
3/99
8-141 Options