The Hcf Paper Path - Xerox DocuPrint N24 Service Manual

8.4.6.4 The HCF Paper Path

The High Capacity Feeder Paper Path is the physical route that a sheet of paper takes from an HCF paper tray to
the printer during a single print cycle. Rubber rollers drive the paper along the Paper Path.
Feed from Tray 3
At the start of a print cycle the Tray 3 Nudger Roll moves a sheet of paper into Tray 3 Feed Roll. The
Feed Roll moves a single sheet of paper out of Tray 3 and toward the Tray 2 Take Away Roll in the base
engine. The Tray 3 Retard Roll makes sure that only one sheet of paper is fed. As the sheet of paper is
driven to the Tray 2 Take Away Roll it actuates the Tray 3 Take Away Sensor, notifying the Printer Engine
Controller PWB logic that the paper has arrived. The Tray 2 Take Away Roll drives the sheet of paper
into the Registration Roll. After that the sheet continues along the printer paper path until the sheet of
paper, complete with fused image, is driven into an Output Bin.
2/2000
DocuPrint N24, N32, N40, N3225, and N4025 8-243 Options