Rep 4.2.10 Tray 1 & 2 Size Switch Assembly - Xerox DocuPrint N24 Service Manual

REP 4.2.10 Tray 1 & 2 Size Switch Assembly
Parts List on PL 3.1 / PL 3.4
Removal
1 Switch off the printer power and disconnect the AC Power Cord.
2 Remove the Paper Cassette.
3 Disconnect the Size Switch Harness from CN1 on the Size Switch PWB (Figure 4.2.10a).
4 Remove the screw that secures the Size Switch Assembly to the printer frame (Figure 4.2.10a).
5 Remove the assembly from the printer. Remove the two standoffs from the back of the Size
Switch PWB.
Replacement
1 Install the two standoffs on the Size Switch PWB.
2 Assemble the remaining components in reverse order.
3 Verify proper operation.
Repair Procedures
Figure 4.2.10a. Size Switch Assembly.
2/2000
4-36 DocuPrint N24, N32, N40, N3225 and N4025