REP 8.4.3.3 HCF Feed Motor
Parts List on PL 8.4.2.2
Removal
1 Switch the printer power off and disconnect the AC power cord.
2 Remove the HCF Rear Cover (REP 8.4.3.1).
3 Disconnect P/J217 from the HCF PWB.
4 Remove the two screws securing the Motor Bracket to the frame (Figure 8.4.3.3a).
5 Slide the Feed Motor out of the HCF Drive Belt and remove the Motor from the frame.
DocuPrint N24, N32 and N40 Service Manual
Figure 8.4.3.3a. HFC Motor
3/99
8-195
Options