Xerox DocuPrint N24 Service Manual page 437

11 Measure voltage across P/J461-3 and P/J408-1 (6.3.14). The voltage measured is 5VDC +/-
0.25V.
Y N
|
Replace Printer Engine Controller PWB (REP 4.10.6).
12 Switch printer power off. Verify continuity of wire harness between P/J461 and P/J105 (6.3.14).
Continuity is measured.
Y N
|
Repair wire harness.
13 Replace Tray 1 Size Switch Assembly (REP 4.2.10).
14 Measure voltage across P/J408-A9 and P/J408-A7 (6.3.14). The voltage measured is 5VDC +/-
0.25V.
Y N
|
Replace Printer Engine Controller PWB (REP 4.10.6).
15 Switch printer power off. Verify continuity of wire harness between P/J408 and P/J142 (6.3.12).
Continuity is measured.
Y N
|
Repair wire harness.
16 Replace Tray 2 Size Switch Assembly (REP 4.2.10).
DocuPrint N24, N32, N40, N3225, and N4025
2/2000
7-83 Repair Analysis Procedures (RAP)