8.4 High Capacity Feeder
8.4.1 High Capacity Feeder Specifications.
GEN 8.4.1.1 General Specifications
Category
Configuration
Paper feed
Power requirements
Size and weight
GEN 8.4.1.2 High Capacity Feeder Space Requirements
For easy operation, maintenance, and replacing of consumables, the following space requirements are
the minimum clearances allowed. Figure 8.4.1.2a illustrates the space requirements when the High
Capacity Feeder Option is installed below the printer.
.
1 60.5 inches (1537mm)
2 36 inches (914mm)
3 4 inches (102mm)
4 12 inches (305mm)
5 36.5 inches (927mm)
6 72 inches (1829mm)
Minimum of 30 inches (762mm) above the top of the
printer.
DocuPrint N24, N32 and N40 Service Manual
Customer installed option. Attaches under the base printer.
The High Capacity Feeder (HCF) has three trays; Tray 3, Tray 4 and
Tray 5.
The HCF Tray 3 is the same as Trays 1 and 2 and supports the same
paper handling capabilities as Tray 2. Trays 4 and 5 each hold 1000
sheets of Letter, A4 or Executive Paper. Trays 4 and 5 use long edge
feed only.
The Printer provides all of the HCF power requirements; +5VDC and
+24VDC
Height: 16.8in. (426mm)
Width: 20.5in. (520mm)
Depth: 19.3in. (490mm)
Weight: 89.5lbs. (40.7kg)
Figure 8.4.1.2aHCF Configuration
3/99
8-163
Specification
Options