Xerox DocuPrint N24 Service Manual page 753

Network laser printer

Hide thumbs Also See for DocuPrint N24:

Table of Contents

1 Move the Finisher to within 12 inches (304.8 mm) from the printer.

2 Reinstall the Docking Rail under the printer.

3 Secure the Docking Rail with thumb screw.

4 Reconnect the Finisher interface cable to the rear of the printer, and reconnect the Finisher AC

power cord to the right side of the printer.

5 Push the Finisher against the printer, making sure the locating pin on the Transport lines up with

the locating hole on the Docking Cover.

DocuPrint N24, N32 and N40 Service Manual

Chapters

Table of Contents