Xerox DocuPrint N24 Service Manual page 481

Replacement
1 Reinstall one end of the Exit Roll Belt over the small end of the Exit Roller Pulley.
2 Slide the Exit Roller Pulley and attached Belt over the shaft, with the Belt against the Duplex
frame.
3 Reinstall the Transport Roller Gear and E-Ring.
4 Reinstall the Friction Clutch and E-Ring.
5 Reinstall the Exit Gate Solenoid Assembly.
6 Reinstall the Duplex Drive Assembly and making sure you reinstall the other end of the Exit Roll
Belt over the small gear on the Drive Assembly.
7 Reinstall the Duplex PWB.
DocuPrint N24, N32 and N40 Service Manual
3/99
8-43 Options