Rep 8.5.3.73 Compiler Bin Exit Sensor - Xerox DocuPrint N24 Service Manual

Network laser printer

Hide thumbs Also See for DocuPrint N24:

Table of Contents

REP 8.5.3.73 Compiler Bin Exit Sensor

Parts List on PL 8.5.2.15

1 Switch off the printer power and disconnect the AC Power Cord.

2 Open the Top Cover.

3 Release the latches on the Compiler Bin Exit Sensor, and remove the Sensor from the Transport

Chute (Figure 8.5.3.73a).

4 Disconnect J838 from the Compiler Bin Exit Sensor (Figure 8.5.3.73a).

1 Open the Top Cover just enough so you can reach behind the Transport Chute.

2 Reconnect J838 to the Compiler Bin Exit Sensor.

3 Position the Compiler Bin Exit Sensor behind the Transport Chute. Make sure the Sensor

Actuator fits through the actuator cutout in the Chute.

4 Press the latches on the back of the Sensor into the cutouts in the Chute.

5 Close the Top Cover.

DocuPrint N24, N32 and N40 Service Manual

Figure 8.5.3.73a. Compiler Bin Exit Sensor.

Table of Contents