Rap 7.50.5 0105 - Simm5 - Xerox DocuPrint N24 Service Manual

RAP 7.50.5 0105 - SIMM5

1 Switch the printer power off. Remove System Controller PWB from System Controller Chassis.
Remove the SIMM installed in Slot 5. Reinstall the System Controller PWB into its chassis and
switch the printer power on. The error message reappears.
Y N
|
Go to Step 3.
2 Replace the System Controller PWB (REP 4.10.7).
3 Switch the printer power off. Remove System Controller PWB from System Controller Chassis.
Install the SIMM removed in step 1 into Slot 1. Reinstall the System Controller PWB into its
chassis and switch the printer power on. The error message reappears.
Y N
|
Go to Step 5.
4 Replace the SIMM (PL 11.3).
5 Switch the printer power off. Remove System Controller PWB from System Controller Chassis.
Reinstall the SIMM removed in step 1 into Slot 5. Reinstall the System Controller PWB into its
chassis and switch the printer power on. The error message reappears.
Y N
|
Attribute problem to a poor connection of the SIMM on the System Controller PWB and go
to 1.4 Final Actions.
6 Replace the System Controller PWB (REP 4.10.7).
DocuPrint N24, N32, N40, N3225, and N4025
2/2000
7-79 Repair Analysis Procedures (RAP)