Rep 8.5.3.39 Top Bin Rear Cover - Xerox DocuPrint N24 Service Manual

REP 8.5.3.39 Top Bin Rear Cover

Parts List on PL 8.5.2.9
Removal
1 Switch off the printer power and disconnect the AC Power Cord.
2 Remove the Harness Cover (REP 8.5.3.8).
3 Remove the Top Bin Assembly (REP 8.5.3.38).
4 Turn the Bin Assembly upside down. Remove the three screws that secure the Back Cover to the
bottom of the bin (Figure 8.5.3.39a).
5 Disconnect J293 (Figure 8.5.3.39a).
6 Remove the screw that secures the cable clamp to the bin (Figure 8.5.3.39a).
7 Turn the Bin Assembly right side up.
8 Slide the Rear Harness Cover off of the Top Bin Rear Cover (Figure 8.5.3.39a).
9 Remove the screw securing the Top Bin Rear Cover to the Bin Frame (Figure 8.5.3.39a).
10 Release the latch at the top of the Rear Cover, and remove the Cover.
Options
Figure 8.5.3.39a. Back Cover.
3/99
8-372 DocuPrint N24, N32 and N40 Service Manual