Xerox DocuPrint N24 Service Manual page 172

Replacement
1 Reinstall the Registration Shaft in the printer.
2 Ensure the front and rear bearings are properly inserted in the printer frame.
3 Secure the shaft with the inside rear E-ring.
4 Reinstall the Registration Chute and secure with the four screws.
5 Reinstall the cover plate and screw.
6 Reinstall the Registration Sensor.
7 Reinstall the Registration Clutch.
8 Reattach the two Cover Support Straps to the Upper Left Cover Assembly.
9 Reinstall the remaining components and covers.
10 Verify proper operation.
2/2000
Repair Procedures 4-58 DocuPrint N24, N32, N40, N3225 and N4025