REP 4.3.7 MBF Feed Clutch
Parts List on PL 4.3
Removal
1 Switch off the printer power and disconnect the AC Power Cord.
2 Remove the Duplex Unit, if one is installed.
3 Remove the MBF Assembly (REP 4.3.1).
4 Remove the two screws securing the MBF Top Cover to the MBF Assembly, and remove the Top
Cover (Figure 4.3.7a).
5 Remove the screw securing the MBF Rear Hook Bracket to the Feeder Assembly (Figure
4.3.7b).
6 Disconnect the P/J running to the MBF Feed Clutch.
Repair Procedures
Figure 4.3.7a. MBF Assembly Cover.
Figure 4.3.7b. MBF Rear Hook.
2/2000
4-52
DocuPrint N24, N32, N40, N3225 and N4025