Rep 8.1.3.5 Duplex Pwb And Bracket - Xerox DocuPrint N24 Service Manual

REP 8.1.3.5 Duplex PWB and Bracket

Parts List on PL 8.1.2.2
Removal
1 Switch off the printer power and disconnect the
AC Power Cord.
2 Remove the Duplex Rear Cover (REP 8.1.3.3).
3 Disconnect the six P/Js that are connected to the Duplex PWB (Figure 8.1.3.5a).
4 Remove the four screws securing the Duplex PWB to the Duplex PWB Bracket, and remove the
PWB.
5 Remove the two screws securing the bracket.
Replacement
1 Use two screws to secure the PWB Bracket.
2 Reinstall the Duplex PWB onto the PWB Bracket.
3 Use four screws to secure the PWB to the Bracket.
4 Reconnect the six P/Js to the Duplex PWB.
5 Reinstall the Duplex Rear Cover.
DocuPrint N24, N32 and N40 Service Manual
Figure 8.1.3.5a. Duplex PWB and Bracket
3/99
8-31
CAUTION
These components are susceptible
to electrostatic discharge. Observe
all ESD procedures to avoid
damage.
Options