REP 4.3.3 MBF Feed Roll
Parts List on PL 4.3
Removal
1 Switch off the printer power and disconnect the AC Power Cord.
2 Remove the Duplex Unit, if one is installed.
3 Remove the MBF Assembly (REP 4.3.1).
4 Remove the two screws securing the MBF Top Cover to the MBF Assembly, and remove the Top
Cover (Figure 4.3.3a).
5 Loosen the screw securing the MBF No-Paper Sensor Bracket to the Feeder Assembly, and lift
the Sensor Bracket out of the way.
6 Remove the K-clip securing the MBF Feed Roll to the Feed Shaft, and slide the Feed Roll off of
the shaft.
Repair Procedures
Figure 4.3.3a. MBF Assembly Cover.
Figure 4.3.3b. MBF Feed Roll.
2/2000
4-44
DocuPrint N24, N32, N40, N3225 and N4025