REP 4.10.5 Upper Left Cover Interlock Switch Assembly
Parts List on PL 11.2
Removal
1 Switch off the printer power and disconnect the AC Power Cord.
2 Open the Duplex Unit, if installed, and the Left Upper Cover.
3 Remove the Upper Rear Cover Assembly (REP 4.1.3).
4 Disconnect the two wires that are connected to the Interlock Switch (Figure 4.10.5a).
5 Remove the screw that secures the Interlock Switch Bracket to the printer frame (Figure
4.10.5a).
6 Move the switch assembly down and out of the printer.
7 Rotate the Switch Actuator Lever so it is straight up, and slide it off of the Bracket.
8 Press the two clips securing the Switch to the Bracket and push the Switch out of the Bracket.
DocuPrint N24, N32, N40, N3225, and N4025
Figure 4.10.5a. Upper Left Cover Interlock Switch.
2/2000
4-89
Repair Procedures