Rep 8.4.3.19 Tray 4 And 5 Feeder Assembly - Xerox DocuPrint N24 Service Manual

REP 8.4.3.19 Tray 4 and 5 Feeder Assembly

Parts List on PL 8.4.2.7/PL 8.4.2.9
Removal
1 Switch the printer power off and disconnect the AC power cord.
2 Remove Tray 4/5.
3 Remove Paper Level Sensor (REP 8.4.3.10).
4 Remove the HCF Rear Cover (REP 8.4.3.1).
5 Remove Tray 4/5 Feed Clutch (REP 8.4.3.9) (Figure 8.4.3.19a).
6 Remove the E-ring that secures the One Way Clutch located behind the Tray 4/5 Feed Clutch.
7 Remove Tray 4/5 Gear Assembly (Figure 8.4.3.19a).
8 Remove the Tray 4/5 Retard Roll (Figure 8.4.3.19b).
9 Remove the Tray 4/5 Spacer and Clutch Assembly (Figure 8.4.3.19b).
10 Slide Feeder Assembly out of printer.
DocuPrint N24, N32 and N40 Service Manual
Figure 8.4.3.19a. Tray 4/5 Feed.
3/99
8-219 Options