Xerox DocuPrint N24 Service Manual page 585

Replacement
1 Slide the Retard Roll onto the Retard Shaft.
2 Slide the Feeder Bearing onto the Retard Shaft (Figure 3).
3 Slide the Clutch Stopper and Friction Clutch onto the Retard Shaft.
4 Reinstall an E-ring onto the end of the Retard Shaft.
5 Reinstall two K clips onto the Retard Shaft.
6 Align the Paper Guide with the positioning tabs on the Upper Cover.
7 Reinstall the screws and secure the Paper Guides.
8 Reinstall the Weight Arm onto the Feeder Assembly.
9 Reinstall the Front Cover.
10 Reinstall the Top Cover.
11 Reinstall the Bottom Cover.
DocuPrint N24, N32 and N40 Service Manual
Figure 8.3.3.9b. Retard Shaft.
3/99
8-147 Options