REP 8.5.3.2 Stapler Door Cover
Parts List on PL 8.5.2.1
Removal
1 Switch off the printer power and disconnect the AC Power Cord.
2 Open the Front Cover.
3 Remove the E ring on the top hinge that secures the Front Cover to the Stapler Door Inner Cover
Assembly (Figure 8.5.3.2a).
4 Lift and remove the Stapler Door Cover.
Replacement
1 Reinstall the Stapler Door Cover by sliding the two hinges that are located on the Inner
Assembly, into the two holes in the Stapler Door Cover.
2 Use one E ring on the top hinge to secure the Stapler Door Cover to the Stapler Door Inner
Cover Assembly.
3 Close the Front Cover.
Options
Figure 8.5.3.2a. Front Cover.
3/99
8-316
DocuPrint N24, N32 and N40 Service Manual