REP 8.5.3.44 Top Bin Safety Switch
Parts List on PL 8.5.2.10
Removal
1 Switch off the printer power and disconnect the AC Power Cord.
2 Remove the Harness Cover (REP 8.5.3.8).
3 Remove the Top Bin Assembly (REP 8.5.3.38).
4 Remove the Top Bin Front Cover (REP 8.5.3.43).
5 Disconnect J852 from the Safety Switch (Figure 8.5.3.44a).
6 Remove the two screws that secure the switch to the Bin Frame (Figure 8.5.3.44a). Remove the
switch.
Replacement
1 Position the Top Bin Safety Switch and secure with the two screws.
2 Make sure the Switch Actuator is under the plastic link.
3 Reconnect J852 to the switch.
4 Reinstall the Top Bin Front Cover.
5 Reinstall the Top Bin Assembly.
6 Reinstall the Harness Cover.
Options
Figure 8.5.3.44a. Safety Switch.
3/99
8-380
DocuPrint N24, N32 and N40 Service Manual