Xerox DocuPrint N24 Service Manual page 679

Drive for Tray 5
The HCF Drive PWB switches on the Feed Motor. The HCF Drive Belt transmits the drive energy from
the Feed Motor to HCF Drive Transmission Gear 1. Gear 1 transmits drive to HCF Drive Transmission
Gear 2. HCF Drive Transmission Gear 1 also transmits drive to Tray 5 Drive Gear, which transmits drive
to Tray 5 Take Away Gear. HCF Drive Transmission Gear 2 transmits drive to Tray 5 Feed Clutch. When
the HCF Drive PWB actuates Tray 5 Feed Clutch, the Clutch transmits drive to the Tray 5 Feed Roll and
to the Retard Roll.
Lift Motor Operation for Tray 5
The Tray 5 Lift Motor rotates the Bottom Plate Lift Pulley. Two cables are attached to each end of the
Pulley. The other ends of the cables are attached to the four corners of the bottom plate. When the Motor
rotates the Pulley, the cables wrap around the Pulley and raise the bottom plate.
3/99
DocuPrint N24, N32 and N40 Service Manual 8-241 Options