RAP 7.47 Unfused Image or Image Easily Rubbed Off
1 The paper is smooth (not wrinkled) and undamaged.
Y
N
|
Replace with fresh, dry paper.
2 Run a System Controller Test Print (5.5.2.2.2) for Version 1.7X and below, (5.6.2.2.2) for Version
1.8X, or (5.7.2.12.2) for Version 2.0. The Black boxes on the Test Print a rich, dark gray/black.
Y
N
|
Go to RAP 7.34.
3 Replace the Fuser Assembly (REP 4.7.1)
below, one at a time, until the problem disappears.
Printer Engine Controller PWB (REP 4.10.6).
AC Driver PWB (REP 4.10.3).
DocuPrint N24, N32, N40, N3225, and N4025
PROBLEM
The printed image is not fully fused to the paper. The image easily rubs
off.
. If the problem persists,
2/2000
7-69
replace each component listed
Repair Analysis Procedures (RAP)