Rep 8.3.3.4 Envelope Feeder Rear Cover - Xerox DocuPrint N24 Service Manual

REP 8.3.3.4 Envelope Feeder Rear Cover

Parts List on PL 8.3.2.1
Removal
1 Switch off the printer power and disconnect the AC Power Cord.
2 Remove the Envelope Feeder from the base engine.
3 Remove the Bottom Cover (REP 8.3.3.1).
4 Remove the Top Cover (REP 8.3.3.2).
5 Remove the screw securing the Rear Cover to the Feeder frame (Figure 8.3.3.4a).
6 Release the latch and remove the Cover (Figure 8.3.3.4a).
Replacement
1 Reinstall the Rear Cover onto the Feeder frame.
2 Press in to make sure the Cover latches into place.
3 Use a screw to secure the Cover to the frame.
4 Reinstall the Top Cover.
5 Reinstall the Bottom Cover.
6 Verify proper operation.
Options
Figure 8.3.3.4a. Rear Cover.
3/99
8-140 DocuPrint N24, N32 and N40 Service Manual