Rep 8.1.3.7 Duplex Drive Assembly - Xerox DocuPrint N24 Service Manual

Network laser printer

Hide thumbs Also See for DocuPrint N24:

Table of Contents

REP 8.1.3.7 Duplex Drive Assembly

Parts List on PL 8.1.2.2

1 Switch off the printer power and disconnect the AC Power Cord.

2 Remove the Duplex Rear Cover (REP 8.1.3.3).

3 Remove the Duplex PWB and Bracket (REP 8.1.3.5).

4 Remove the four screws securing the Duplex Drive Assembly to the Duplex frame, and remove

the Assembly (Figure 8.1.3.7a).

1 Position the Duplex Drive Assembly so the open end is to the left of the Duplex Wait Clutch.

2 Loop the end of the Exit Roll Belt over the small gear on the Drive Assembly.

3 Rotate the Duplex Wait Clutch so the tab on the Drive Assembly fits through the notch on the

4 Use four screws to secure the Drive Assembly to the Duplex frame.

5 Reinstall the Duplex PWB and Bracket.

6 Reinstall the Duplex Rear Cover.

DocuPrint N24, N32 and N40 Service Manual

Figure 8.1.3.7a. Duplex Drive Assembly

Table of Contents