Rep 8.5.3.32 Middle Bin Paper Sensor - Xerox DocuPrint N24 Service Manual

REP 8.5.3.32 Middle Bin Paper Sensor

Parts List on PL 8.5.2.7
Removal
1 Switch off the printer power and disconnect the AC Power Cord.
2 Remove the Harness Cover (REP 8.5.3.8).
3 Remove the Middle Bin Assembly (REP 8.5.3.28).
4 Turn the Bin Assembly upside down. Remove the three screws that secure the Back Cover to the
bottom of the bin (Figure 8.5.3.32a).
5 Remove the screw securing the Paper Sensor Bracket to the Bin, and remove the Bracket along
with the attached Paper Sensor (Figure 8.5.3.32a).
6 Disconnect J856 from the Sensor (Figure 8.5.3.32a).
7 Press in and release the Sensor latches that are securing the Sensor to the Bracket, and remove
the Sensor.
Replacement
1 Position the Middle Bin Paper Sensor and insert it into the Sensor cutout in the Sensor Bracket.
2 Reconnect J856 to the Sensor.
3 Reinstall the Sensor Bracket making sure to align the position holes in the Bracket.
4 Use one screw to secure the Bracket to the Bin.
5 Reinstall the Back Cover to the Bin, and use three screws to secure the Cover.
6 Reinstall the Middle Bin Assembly.
7 Reinstall the Harness Cover.
Options
Figure 8.5.3.32a. Paper Sensor.
3/99
8-362 DocuPrint N24, N32 and N40 Service Manual