Xerox DocuPrint N24 Service Manual page 200

Replacement
1 Align the four holes in AC Driver PWB to the four latches on the frame and press the PWB into
place.
2 Reconnect all the P/Js to the AC Driver PWB.
3 Reinstall the Bracket under the frame so it sandwiches SSR1 and SSR2 between it and the
frame.
4 Use two screws to secure the Bracket and SSR1 and SSR2 to the frame.
5 Reinstall the System Controller Assembly and use four screws to secure it to the LVPS.
6 Reinstall the Rear Cover Assembly.
7 Reinstall the Top Cover Assembly.
8 Verify proper operation.
Repair Procedures
2/2000
4-86 DocuPrint N24, N32, N40, N3225 and N4025