Running A Test Print; Running A Pcl Demo; Running A Menu Map; Running A Disk Directory - Xerox DocuPrint N24 Service Manual

Network laser printer

Hide thumbs Also See for DocuPrint N24:

Table of Contents

5.6.2.2.2 Running a Test Print

1 From the Test Menu, press the [2] or [6] until the Test Print submenu is displayed.

2 Press [4] to run a Test Print.

NOTE: The Test Print is known as the "System Controller Test Print". Also, for each print desired two

sheets will be printed - one sheet if duplexed.

NOTE: If more than one print is desired, change Print Quantity in the System Menu for desired quantity.

NOTE: Verify Edge to Edge is set to "OFF", if checking Registration.

1 From the Test Menu, press the [2] or [6] until the PCL Demo submenu is displayed.

2 Press [4] to print a PCL Demo.

NOTE: If more than one print is desired, change Print Quantity in the System Menu for desired quantity.

1 From the Test Menu, press [2] or [6] until the Menu Map submenu is displayed.

2 Press [4] to print a Menu Map.

NOTE: Defines each Item and their respective choices which is located within each Menu.

1 From the Test Menu, press [2] or [6] until the Disk Directory submenu is displayed.

2 Press [4] to print a Disk Directory.

NOTE: Provides a print out of all information (jobs, fonts, forms, & etc.) that is on the respective Hard

DocuPrint N24, N32, N40, N3225, and N4025

General Procedures and Information

Table of Contents