Rep 4.2.9 Tray 1 & 2 No Paper Sensor - Xerox DocuPrint N24 Service Manual

REP 4.2.9 Tray 1 & 2 No Paper Sensor
Parts List on PL 3.1 / PL 3.4
Removal
1 Switch off the printer power and disconnect the AC Power Cord.
2 Remove the Tray 1 / Tray 2.
3 Release the rear lock tab on the back of the No Paper Sensor (Figure 4.2.9a).
4 Disconnect the harness from the sensor.
Replacement
1 Assemble in reverse order.
2 Verify proper operation.
DocuPrint N24, N32, N40, N3225, and N4025
Figure 4.2.9a. No Paper Sensor.
2/2000
4-35 Repair Procedures