Gen 8.5.1.7 Finisher Space Requirements - Xerox DocuPrint N24 Service Manual

Network laser printer

Hide thumbs Also See for DocuPrint N24:

Table of Contents

GEN 8.5.1.7 Finisher Space Requirements

For easy operation, maintenance, and replacing of consumables, the following space requirements are

the minimum clearances allowed. Figure 8.5.1.7a illustrates the requirements for the Finisher Option

installed on the printer.

1 60.5 inches (1524mm).

2 36 inches (813mm)

3 4 inches (102mm)

4 48 inches (305mm)

5 36.5 inches (914mm)

6 72 inches (1829mm)

Minimum of 30 inches (762mm) above the top of the Finisher when the Finisher is set to output to Bin

DocuPrint N24, N32, N40, N3225, and N4025

Figure 8.5.1.7aFinisher Configuration

Table of Contents