5.4 Diagnostics Mode
5.4.1 Diagnostic Mode Routines and Subroutines
While in this Diagnostic Mode you have access to a variety of test functions:
Test Print
•
Generate a built-in Test Pattern.
Service Output Test
•
Switch on and off a specific component, such as a motor or solenoid.
•
Service Sensor (H/L) Input Test)
Check the signal level (on/off) coming from a specific sensor.
Service Value (A/D) Input Test)
•
Check the value of a signal coming from a specific sensor.
Adjustment Procedures
•
Checks the NVM value of a specific component.
5.4.2 Control Panel Functions
The following figure displays the functions of the Control Panel when the Control Panel is connected to
the System Controller PWB.
General Procedures and Information
3/99
5-12
DocuPrint N24, N32 and N40 Service Manual