Rap 7.24 Mcu Failure (U6-1) - Xerox DocuPrint N24 Service Manual

RAP 7.24 MCU Failure (U6-1)

1 Switch off printer main power. Wait one minute. Switch on printer main power. The error message
reappears.
Y N
|
Suspect a possible intermittent problem with the Printer Engine Controller PWB (REP
4.10.6), the LVPS (REP 4.10.2), or the connectors and wiring linking these components.
2 Measure the voltage between J400-7 and FG (6.3.3), and between J400-8 and FG on the Printer
Engine Controller PWB. There is a steady +5VDC between J400-7 and FG, and a steady +5VDC
between J400-8 and FG.
Y N
|
Check wiring between P/J 400 and P/J 501 (6.3.3). If OK, replace the LVPS Assembly
(REP 4.10.2).
3 Replace the Printer Engine Controller PWB (REP 4.10.6).
DocuPrint N24, N32 and N40 Service Manual
3/99
7-33 Repair Analysis Procedures (RAP)