REP 4.1 Covers
REP 4.1.1 Fuser Full Cover
Parts List on PL 1.1
Removal
1 Switch off the printer power and disconnect the AC Power Cord.
2 Remove the Mailbox Unit, if installed.
3 Open the Duplex Unit if one is installed.
4 Open the Left Upper Cover Assembly and remove the screw securing the Fuser Cover to the
frame (Figure 4.1.1a).
5 Open the Front Left Cover and remove the screw securing the Fuser Cover to the frame (Figure
4.1.1a).
6 Rotate the cover slightly, in the direction of the arrows to release the lock tabs (Figure 4.1.1a).
The lock tabs are illustrated in figure 4.1.1b.
7 Lift the Fuser Full Cover off of the Top Cover Assembly.
DocuPrint N24, N32 and N40 Service Manual
Figure 4.1.1a. Fuser Full Cover.
3/99
4-5
Repair Procedures