Rap 8.5.7.7 Error Code "Close Stapler Door - Xerox DocuPrint N24 Service Manual

RAP 8.5.7.7 Error Code "Close Stapler Door"

1 Open and close the Stapler Door Cover.The error code reappears.
Y N
|
Problem solved.
2 Open the Stapler Door Cover and inspect the molded tab that actuates the Front Cover Interlock
Switch. Is the actuator tab is in good condition (unbroken).
Y N
|
Replace the Stapler Door Cover (REP 8.5.3.2).
3 Enter Diagnostic Mode - Input H/L - Front Cover Interlock Switch. Actuate and deactuate the
Front Cover Interlock Switch. The Control Panel LCD displays L when the Switch is actuated and
H when the Switch is deactuated.
Y N
|
Replace the Front Cover Interlock Switch (REP 8.5.3.75).
4 Replace the Finisher PWB (REP 8.5.3.83). The error code reappears.
Y N
|
Problem solved.
5 Replace the Printer Engine Controller PWB (REP 4.10.6).
Options
3/99
8-544 DocuPrint N24, N32 and N40 Service Manual