Rep 4.2 Tray; Rep 4.2.1 Tray 1 Lift Up Motor - Xerox DocuPrint N24 Service Manual

REP 4.2 Tray 1

REP 4.2.1 Tray 1 Lift Up Motor

Parts List on PL 3.1
Removal
1 Switch off the printer power and disconnect the AC Power Cord.
2 Remove Tray 1.
3 Remove the Upper Rear Cover Assembly (REP 4.1.3).
4 Disconnect the Lift Up Motor harness (P/J203) (Figure 4.2.1a).
5 Release the cable clamp securing the MBF Cable. Remove the three screws securing the Lift Up
Motor to the printer frame (Figure 4.2.1a).
6 Slide the Motor out to remove.
Replacement
1 Reinstall the Lift Up Motor.
2 Be careful not to trap any wires between the Motor and the frame.
3 Secure the Motor to the frame with the screws.
4 Reconnect the harness to the rear of the Lift Up Motor.
5 Reinstall the Upper Rear Cover Assembly.
6 Reinstall Tray 1.
7 Verify proper operation.
DocuPrint N24, N32 and N40 Service Manual
Figure 4.2.1a. Tray 1 Lift Up Motor Removal.
3/99
4-15 Repair Procedures