Rep 4.6 Duplex Assembly - Xerox B210 Service Manual

4. Remove three screws, then remove the LSU,
Screws
Figure 2 LSU Removal (Top View)
Replacement
Replacement is the reverse of the removal procedure.
Initial Release
Xerox® B210 Service Manual
Figure 2.

REP 4.6 Duplex Assembly

Parts List on PL 4.2
Removal
1. Switch off the machine, then disconnect the power cord.
2. Remove the Paper Cassette.
3. Remove the Left and Right Side Covers,
4. Remove the Rear Cover, REP
NOTE: The Rear Cover holds the Duplex Assembly Pivot in the frame cutout. With the
Rear Cover removed, the assembly will come out of the pivot when the front latches are
released.
5. Press the two green tabs in the front of the printer to release the Duplex Assembly, then
remove the Duplex Assembly,
Figure 1 Duplex Assembly Release Tabs (Bottom View)
July 2019
4-17
REP 2.2.
2.3.
Figure 1.
Release Tabs
Repairs - Adjustments
REP 4.5, REP 4.6