8.3 Envelope Feeder
8.3.1 Envelope Feeder Specifications
GEN 8.3.1.1 General Specifications
Category
Configuration
Envelope stack capacity
Power requirements
Size and weight
GEN 8.3.1.2 Recommended Envelope Sizes
COM #10 - 4in. x 9.5in. (104.8mm x 241.3mm)
Monarch - 3.9in. x 7.5in. (98.4mm x 190.5mm)
C5 - 6.4in. x 8.7in. (162mm x 220mm)
DL -4.3in. x 8.7in. (110mm x 220mm)
GEN 8.3.1.3 Components that Need Periodic Replacement
DocuPrint N24, N32 and N40 Service Manual
Customer installed option. Replaces the MBF. The
Envelope Feeder uses the MBF Support for attachment
to the printer base engine.
Maximum 100 envelopes.
Envelope Feeder is equipped with a No-Paper Sensor.
The Printer provides all of the Envelope Feeder power
requirements; +5VDC and +24VDC
Height: 5in. (133mm)
Width: 11in. (278mm)
Depth: 17.4in. (444mm)
Weight: 9.5lbs. (4.3kg)
Brand and size
Component
Retard Roll
Feed Belt
Specification
Replace at ...
As needed
As needed
3/99
8-129
Options