REP 8.1.3.2 Duplex Cover
Parts List on PL 8.1.2.1
Removal
1 Switch off the printer power and disconnect the AC Power Cord.
2 Remove the Duplex Module Assembly (REP 8.1.3.1).
3 Place the Assembly on a flat and stable surface.
4 If a Face Up Bin in installed, remove the two knurled screws securing the Bin to the Cover, and
remove the Bin (Figure 8.1.3.2a).
5 Remove the four screws securing the Duplex Cover to the Assembly, and remove the Cover
(Figure 8.1.3.2a).
Replacement
1 Place the Assembly, feed wheels up, on a flat and stable surface.
2 Reinstall the Duplex Cover over the Duplex Module Assembly, and use four screws to it to the
Assembly.
3 Reinstall the Bin onto the Cover, and use two knurled screws to secure it to the Cover.
4 Reinstall the Duplex Module Assembly onto the printer.
Options
Figure 8.1.3.2a. Duplex Cover.
3/99
8-28
DocuPrint N24, N32 and N40 Service Manual