Finisher; Finisher Specifications; Gen 8.5.1.1 General Specifications; Gen 8.5.1.2 Stapler Specifications - Xerox DocuPrint N24 Service Manual

8.5 Finisher

8.5.1 Finisher Specifications

GEN 8.5.1.1 General Specifications

Category
Configuration
Power requirements
Power consumption
Finisher noise levels
Size and weight

GEN 8.5.1.2 Stapler Specifications

Category
Stapler Specifications
Staple Cartridge Capacity

GEN 8.5.1.3 Compiler Specifications

Category
Compiler specifications
Maximum quantity of paper per set
Minimum size of paper
DocuPrint N24, N32 and N40 Service Manual
Customer installed option. Attaches to the right side of the printer, with part of the
Finisher extending over the printer output Bin.
The Finisher cannot be installed if the Mailbox option is installed.
The Finisher has two modes: 1- Sort and 2- Staple and Sort.
The Printer provides all of the Finisher power requirements; +5VDC and +24VDC.
The Printer also provides filtered 110 or 220 VAC, which the Finisher converts into
+5VDC and an interlock controlled +24VDC.
The Finisher consumes 55W (110VAC) or 55W (220VAC) during operation.
71.8 db while running
Height: 44.6 inches (1,133mm)
Width: 22.9 inches (582mm)
Depth: 25.9 inches (658mm)
Weight: 127.9 Lbs (58kg)
The Finisher Stapler can staple a maximum stack size of 50 sheets of 20lb
(80 GSM) paper.
The user can specify front staple, rear staple, or dual staples.
Contains 5,000 staples
The Complier aligns the sides of the paper stack before delivering it to
the Output Bin.
50 sheets
182mm / 7.2 in. wide
Specification
Specification
Specification
3/99
8-261 Options