REP 8.5.3.51 Compiler Paper Sensor
Parts List on PL 8.5.2.11
Removal
1 Switch off the printer power and disconnect the AC Power Cord.
2 Disconnect the Finisher from the Printer (REP 8.5.3.1).
3 Remove the Stapler Door Inner Cover Assembly (REP 8.5.3.3)
4 Remove the Upper Rear Cover (REP 8.5.3.5).
5 Remove the Transport Assembly (REP 8.5.3.11).
6 Remove the Upper Left Cover (REP 8.5.3.12).
7 Remove the four screws securing the Tie Plate to the Finisher frame (Figure 8.5.3.51a). Remove
the Tie Plate.
8 Remove the screw securing the Compiler Paper Sensor Bracket to the Compiler Bin (Figure
8.5.3.51b). Remove the Bracket along with the Compiler Paper Sensor.
9 Disconnect P843 from the Sensor (Figure 8.5.3.51b).
10 Press in and release the Sensor latches that are securing the Sensor the Sensor to the Bracket
(Figure 8.5.3.51b). Remove the Sensor.
Options
Figure 8.5.3.51a. Tie Plate.
3/99
8-392
DocuPrint N24, N32 and N40 Service Manual