Service Parts Disassembly
REP 3.3 Fuser & IBT Drive Motor Assembly
PL3.1.10
8-28
1. Remove the Top Rear Cover and the Rear Cover (REP 19.6,
2. Remove the Right Cover (REP 19.8,
3. Remove the PWB Chassis Unit (REP 18.10,
4. Remove the Duct Rear/ Fuser Fan Duct/ Fuser Rear Duct (REP 4.2,
5. Disconnect the 2 wiring harness connectors that are connected to the Fuser
Drive Motor Assembly.
6. Remove 4 screws (silver, 6mm) that secure the Fuser Drive Motor Assembly
and remove the Fuser Drive Motor Assembly.
page
page
8-219).
page
8-197).
Phaser 7500 Printer Service Manual
8-217).
page
8-39).
s7500-083